2024 : 4 : 15
Reza Beygi

Reza Beygi

Academic rank: Associate Professor
ORCID: https://orcid.org/0000-0002-0110-1642
Education: PhD.
ScopusId: 36337544600
Faculty: Engineering
Address: Arak University
Phone: 086-32625824

Research

Title
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature
Type
JournalPaper
Keywords
Friction stir weldingAl-Cu laminated compositeAxial load and torqueMaterial flow
Year
2016
Journal International Journal of Advanced Manufacturing Technology
DOI
Researchers Reza Beygi ، Mohsen Kazeminezhad ، Majid Zarezadeh Mehrizi ، Ghasem Eisaabadi bozcheloei ، Altino Loureiro

Abstract

The effect of the layer in contact with tool (Al or Cu) and the depth of plunge on friction stir butt welding of Al-Cu bilayer laminated composites produced by cold roll welding were studied. The measurement of weld cross sections and variations of the axial load and torque during welding process showed that material flow is influenced by the material which is in contact with the shoulder. Being Al layer in contact with the shoulder led to higher force and torque during welding, and a defect-free weld could be obtained in this manner. By welding from Cu side, a higher plunge depth was needed to develop enough force and torque and thereby a defect-free weld. The amount of material swept by the shoulder and flow stress of the material in contact with shoulder have determined the force and torque and also temperature during welding.