2024 : 12 : 26
فارسی
Majid Zarezadeh Mehrizi

Majid Zarezadeh Mehrizi

Academic rank: Associate Professor
ORCID: https://orcid.org/0000-0002-6187-8592
Education: PhD.
ScopusId: 42862660300
HIndex:
Faculty: Engineering
Address: Arak University
Phone:
Home

Research activities

Journal Papers
Ti2SnC MAX Phase Directly Synthesized by High-Temperature Ball Milling Eyhab Ali, Shaymaa Abed Hussein, Manal Morad Karim, Alzahraa S. Abdulwahid, Alaa A. Omran, Majid Zarezadeh Mehrizi, Ali Alsalamy, Ahmed Alawadi, Adnan Hashim Abdulkadhim, Esraa Adnan Abdullah, Safaa Mustafa Hameed (2024)
A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior Reza Beygi, Amirabbas Talkhabi, Majid Zarezadeh Mehrizi, Eduardo A. S. Marques, Ricardo J. C. Carbas, Lucas F. M. Da Silva (2023)
Microstructure and properties of NiAl/TiC composite synthesized by spark plasma sintering of mechanically activated elemental powders Zhiju Zhao, Chenglin Wang, Liqin Yang, Yanping Cheng, Zhenyu Cai, Majid Zarezadeh Mehrizi (2023)
Synthesis and Characterization of the in-situ Ti3SiC2 / Al2O3 Composite by SPS of Mechanically Activated Powders of TiO2, Al, C, and Si Hasan Sh. Majdi, Tarik Hafdhi Abdtawfeeq, Waseem Mohammed Gameel Hasan, Israa Taha Ibrahim, Hussein Riyadh Taresh, Majid Zarezadeh Mehrizi, Salema K. Hadrawi, Mohamed Rashad Mohamed El Sharkawy (2023)
A Parametric Study on the Effect of FSW Parameters and the Tool Geometry on the Tensile Strength of AA2024–AA7075 Joints: Microstructure and Fracture Reza Beygi, Majid Zarezadeh Mehrizi, Alireza Akhavan Saffar, Sajad Mohamadi, Lucas da Silva (2023)
Synthesis of Ti3SnC2–Al2O3 composite by mechanical alloying and subsequent heat treatment Yan Cao, Majid Zarezadeh Mehrizi, Ali Rajhi, Sagr Alamri, Ali Anqi (2022)
Effect of Mg and Si on intermetallic formation and fracture behavior of pure aluminum-galvanized carbon-steel joints made by weld-brazing Reza Beygi, Majid Zarezadeh Mehrizi, Fardin Nematzadeh (2021)
Direct synthesis of NiAl intermetallic matrix composite with TiC and Al2O3 reinforcements by mechanical alloying of NiO–Al–Ti–C powder mixture Wei Xia, Majid Zarezadeh Mehrizi (2021)
Design of friction stir welding for butt joining of aluminum to steel of dissimilar thickness: heat treatment and fracture behavior Reza Beygi, Majid Zarezadeh Mehrizi, a Akhavan-Safar, Altino Loureiro, Anne Da Silva (2020)
Synthesis of NiAl/TiC–Al2O3 composite by mechanically activated combustion synthesis Majid Zarezadeh Mehrizi, Masoud Sedigh Mofrad (2020)
Formation mechanism for synthesis of Ti3SnC2 MAX phase mehdi Fattahi, Majid Zarezadeh Mehrizi (2020)
A review on recent advances in hollow spheres for hydrogen storage Majid Zarezadeh Mehrizi, Jafar Abdi, reza Kazemi, Ehsan Salehi (2020)
Preparation of crack-free TiO2 coating by active screen plasma annealing method Mohammad Velashjerdi, Meysam Soleymani, Majid Zarezadeh Mehrizi (2020)
Synthesis of NiAl-WC composite by the thermal explosion of elemental powders Shu-Rong Yan, Majid Zarezadeh Mehrizi, Loke Kok Foong (2020)
Synthesis of NiAl-TiC nanocomposite during mechanical alloying of Ni-Ti-Al-C powder mixture Majid Zarezadeh Mehrizi, Hadi Jalali, Reza Beygi, Mohammad Velashjerdi (2019)
Fabrication of NiAl–Al2O3-WC nanocomposite by mechanical alloying and subsequent heat treatment Ashkan Goudarzi, Amir Lalianpour, Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei (2019)
Investigation into microstructural evolutions, mechanical properties and thermal analysis of Al(Zn)/Al2O3 nano-composite fabricated by mechanical milling and SPS method Mahdi Oraei, Hossein Mostaan, Mehdi Rafiei, Ahmadreza Abbasian, Majid Zarezadeh Mehrizi (2019)
Reaction pathway of NiAl/WC nanocomposite synthesized from mechanical activated NieAleWeC powder system Majid Zarezadeh Mehrizi, Mohammad reza Momeni, Reza Beygi, Ghasem Eisaabadi bozcheloei, Bong-Hwan kim, Shae-Kwan Kim (2019)
Synthesis of a NiTi 2-AlNi-Al 2 O 3 nanocomposite by mechanical alloying and heat treatment of Al-TiO 2-NiO Reza Beygi, Majid Zarezadeh Mehrizi, Hossein Mostaan, mahdi rafiei, AhmadReza Abbasian (2019)
Synthesis of a NiTi2–AlNi–Al2O3 nanocomposite by mechanical alloying and heat treatment of Al–TiO2–NiO Reza Beygi, Majid Zarezadeh Mehrizi, Hossein Mostaan, Mehdi Rafiei, Ahmadreza Abbasian (2019)
Mechanically activated combustion synthesis of Ti3AlC2/Al2O3nanocomposite from TiO2/Al/C powder mixtures Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei, Mohammad Velashjerdi, Fardin Nematzadeh (2019)
Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method Mehdi Raoufi, Seyed Abdolali Zolanvari, Majid Zarezadeh Mehrizi (2018)
Synthesis of Fe3 Al–TiC-SiC Nanocomposite by Mechanical Alloying of FeSiTiO3–Al–C Powders Hossein Qanavatian, Majid Zarezadeh Mehrizi, Mehdi Raoufi (2018)
The effect of solution treatment time on the tensile deformation characteristics of naturally-aged A383 alloy die castings Ghasem Eisaabadi bozcheloei, Murat Turyakioglu, gil yong yeom, Nelson Netto, Reza Beygi, Shae Kwang Kim, Majid Zarezadeh Mehrizi (2018)
New numerical/experimental model for prediction of tensile properties in aluminum A357 castings: the effect of microstructure and microshrinkages Mohammad Mostafaei, Mahdi Ghobadi, Reza Beygi, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei (2018)
Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals Reza Beygi, Majid Zarezadeh Mehrizi, David Verdera, Altino Loureiro (2018)
Fabrication of Cerium Oxide Nanoparticles by Solution Combustion Synthesis and Their Cytotoxicity Evaluation Majid Zarezadeh Mehrizi, Saeid Ahmadi, Reza Beygi, Marzieh Asadi (2018)
Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture Majid Zarezadeh Mehrizi, Hossein Mostaan, Reza Beygi, Mehdi Rafiei, Ahmadreza Abbasian (2018)
The effect of solution treatment time on the microstructure and ductility of naturally-aged A383 alloy die castings Ghasem Eisaabadi bozcheloei, gil yong yeom, Murat Turyakioglu, Nelson Netto, Reza Beygi, Shae Kwang Kim, Majid Zarezadeh Mehrizi (2018)
Direct reduction of blood serum cholesterol using Thymus vulgaris L.: Preliminary biosorption study Ehsan Salehi, Saeedeh Afshar, Majid Zarezadeh Mehrizi, Ali Chehrei, Marzieh Asadi (2018)
Direct synthesis of Ti3AlC2-Al2O3 nanocomposite by mechanical alloying Majid Zarezadeh Mehrizi, Reza Beygi (2018)
Thermodynamic Analysis of Solid Solution Formation in the Nanocrystalline W-Co-Si Ternary System by Mechanical Alloying Majid Zarezadeh Mehrizi, Reza Beygi (2017)
Response to comments from M. Sharifitabar on the paper “Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite” Hossein Mostaan, Majid Zarezadeh Mehrizi, Mehdi Rafiei, Reza Beygi, AhmadReza Abbasian (2017)
Friction Stir Processing of Al with Mechanically Alloyed Al-TiO2-Graphite Powder: Microstructure and Mechanical Properties Reza Beygi, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei (2017)
Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite Hossein Mostaan, Majid Zarezadeh Mehrizi, Mehdi Rafiei, Reza Beygi, Ahmadreza Abbasian (2017)
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature Reza Beygi, Mohsen Kazeminezhad, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Altino Loureiro (2017)
Mechanical activation-assistedcombustionsynthesisofinsitu aluminum matrixhybrid(TiC/Al2O3)nanocomposite Majid Zarezadeh Mehrizi, Reza Beygi, Hossein Mostaan, Mehdi Raoufi, Aboulfazl Barati (2016)
Hot corrosion behavior of CoWSi/WSi2 coating exposed to Na2SO4þNaCl salt at 900 1C Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Reza Beygi (2016)
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature Reza Beygi, Mohsen Kazeminezhad, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Altino Loureiro (2016)
Synthesis ofAl/TiC–Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei (2016)
Evaluation of oxidation behavior of laser clad CoWSi–WSi2 coating on pure Ni substrate at different temperatures Majid Zarezadeh Mehrizi, morteza shamanian, Ali Saidi, Reza ShojaRazavi, Reza Beygi (2015)
CoWSi/WSi2 Nanocomposite Produced by Mechanical Alloying Majid Zarezadeh Mehrizi, morteza shamanian, Ali Saidi (2014)
Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior Majid Zarezadeh Mehrizi, morteza shamanian, Ali Saidi, Reza ShojaRazavi (2014)
Characterization and Synthesis of Co(ss)/WSi2-CoWSi Nanocomposite by Mechanical Alloying and Subsequent Sintering Majid Zarezadeh Mehrizi, morteza shamanian, Ali Saidi (2013)
Conference Papers
A novel lap-butt joint design for FSW of aluminum to steel in tee- configuration: Joining mechanism, intermetallic formation, and fracture behaviour Reza Beygi, Amirabbas Talkhabi, Majid Zarezadeh Mehrizi, Eduardo A. S. Marques, Ricardo J. C. Carbas, Lucas F. M. Da Silva (2023)
Corrosion Behavior of TiN Nanostructure Coatings on Steel Substrate by PACVD Technique Farzaneh Maghsoodi, Mehdi Raoufi, Majid Zarezadeh Mehrizi (2019)
The Effect of Heat Treatment on Weld Strength of Al- Steel Joints with Different Thicknesses Reza Beygi, Saeid Ahmadi, Majid Zarezadeh Mehrizi, Mahdi Rezvanyvardom (2017)
EFFECTS OF Sr ON THE MICROSTRUCTURE OF ELECTROMAGNETICALLY STIRRED SEMI SOLID HYPOEUTECTIC Al-Si ALLOYS Ghasem Eisaabadi bozcheloei, Ali Sonboli, Reza Beygi, Majid Zarezadeh Mehrizi, Ashkan Nouri (2016)
Projects
Development of New Aluminum and Magnesium alloys Ghasem Eisaabadi bozcheloei, Majid Zarezadeh Mehrizi, Reza Beygi (2018)

Links

More
Powered By Jiro