2024 : 10 : 5
Reza Beygi

Reza Beygi

Academic rank: Associate Professor
ORCID: https://orcid.org/0000-0002-0110-1642
Education: PhD.
ScopusId: 36337544600
HIndex:
Faculty: Engineering
Address: Arak University
Phone: 086-32625824

Research activities

Journal Papers
Mechanism of toughness enhancement of brittle fracture by intermittent η-intermetallic in Al/Cu joint made by FSW Reza Beygi, Ricardo J. C. Carbas, Eduardo A. S. Marques, Ana Queiros, Mohammad Mehdi Kasaei, Lucas F. M. Da Silva (2024)
On the influence of joining processes on the vibration of structures Pedro Millan, Francisco Tenreiro, Jao Amorim, Mohammad Mehdi Kasaei, Reza Beygi, Lucas F. M. Da Silva, Jorge Ambrosio (2023)
A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior Reza Beygi, Amirabbas Talkhabi, Majid Zarezadeh Mehrizi, Eduardo A. S. Marques, Ricardo J. C. Carbas, Lucas F. M. Da Silva (2023)
Effect of Alloying Elements on Intermetallic Formation during Friction Stir Welding of Dissimilar Metals: A Critical Review on Aluminum/Steel Reza Beygi, Ivan Galvao, Alireza Akhavan Saffar, Hesam Pouraliakbar, Vahid Fallah, Lucas da Silva (2023)
A Parametric Study on the Effect of FSW Parameters and the Tool Geometry on the Tensile Strength of AA2024–AA7075 Joints: Microstructure and Fracture Reza Beygi, Majid Zarezadeh Mehrizi, Alireza Akhavan Saffar, Sajad Mohamadi, Lucas da Silva (2023)
Impact Fatigue Life of Adhesively Bonded Composite-Steel Joints Enhanced with the Bi-Adhesive Technique Alireza Akhavan Saffar, Ghasem Eisaabadi bozcheloei, Shahin Jalali, Reza Beygi, Majid Ayatollahi, Lucas da Silva (2023)
3D Printing of Acrylonitrile Butadiene Styrene by Fused Deposition Modeling: Artificial Neural Network and Response Surface Method Analyses Mahmoud Moradi, Reza Beygi, Noordin Mohd. Yusof, Ali Amiri, Lucas da Silva, Safian Sharif (2022)
Impact fatigue life improvement of bonded structures using the bi-adhesive technique Alireza Akhavan Saffar, Ghasem Eisaabadi bozcheloei, Shahin Jalali, Reza Beygi, Lucas da Silva (2022)
Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution Hesam Pouraliakbar, Reza Beygi, Vahid Fallah, asal Hosseini Monazzah, Mohammad Reza Jandaghi, Matteo Pavese, Lucas da Silva, Gholamreza Khalaj (2021)
The inhibitory effect of stir zone liquefaction and eutectic-phase formation on the growth of γ/β intermetallics during dissimilar FSW of Al/Mg alloys Reza Beygi, Hesam Pouraliakbar, Kiarash Torabi, Ghasem Eisaabadi bozcheloei, Vahid Fallah, Lucas da Silva, Rao Shi, Shae Kwang Kim (2021)
Effect of friction stir welding parameters on the deep drawing of tailor-welded blanks (TWBs) Ezatolah Kamalvand, Ali Jabbari, Mohammadreza sheykholeslami Borghani, Siamak Mazdak, Reza Beygi, Sajad Mohamadi (2021)
Design of friction stir welding for butt joining of aluminum to steel of dissimilar thickness: heat treatment and fracture behavior Reza Beygi, Majid Zarezadeh Mehrizi, a Akhavan-Safar, Altino Loureiro, Anne Da Silva (2020)
Synthesis of NiAl-TiC nanocomposite during mechanical alloying of Ni-Ti-Al-C powder mixture Majid Zarezadeh Mehrizi, Hadi Jalali, Reza Beygi, Mohammad Velashjerdi (2019)
Fabrication of NiAl–Al2O3-WC nanocomposite by mechanical alloying and subsequent heat treatment Ashkan Goudarzi, Amir Lalianpour, Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei (2019)
Reaction pathway of NiAl/WC nanocomposite synthesized from mechanical activated NieAleWeC powder system Majid Zarezadeh Mehrizi, Mohammad reza Momeni, Reza Beygi, Ghasem Eisaabadi bozcheloei, Bong-Hwan kim, Shae-Kwan Kim (2019)
Synthesis of a NiTi 2-AlNi-Al 2 O 3 nanocomposite by mechanical alloying and heat treatment of Al-TiO 2-NiO Reza Beygi, Majid Zarezadeh Mehrizi, Hossein Mostaan, mahdi rafiei, AhmadReza Abbasian (2019)
Synthesis of a NiTi2–AlNi–Al2O3 nanocomposite by mechanical alloying and heat treatment of Al–TiO2–NiO Reza Beygi, Majid Zarezadeh Mehrizi, Hossein Mostaan, Mehdi Rafiei, Ahmadreza Abbasian (2019)
Mechanically activated combustion synthesis of Ti3AlC2/Al2O3nanocomposite from TiO2/Al/C powder mixtures Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei, Mohammad Velashjerdi, Fardin Nematzadeh (2019)
The effect of solution treatment time on the tensile deformation characteristics of naturally-aged A383 alloy die castings Ghasem Eisaabadi bozcheloei, Murat Turyakioglu, gil yong yeom, Nelson Netto, Reza Beygi, Shae Kwang Kim, Majid Zarezadeh Mehrizi (2018)
New numerical/experimental model for prediction of tensile properties in aluminum A357 castings: the effect of microstructure and microshrinkages Mohammad Mostafaei, Mahdi Ghobadi, Reza Beygi, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei (2018)
Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals Reza Beygi, Majid Zarezadeh Mehrizi, David Verdera, Altino Loureiro (2018)
Fabrication of Cerium Oxide Nanoparticles by Solution Combustion Synthesis and Their Cytotoxicity Evaluation Majid Zarezadeh Mehrizi, Saeid Ahmadi, Reza Beygi, Marzieh Asadi (2018)
Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture Majid Zarezadeh Mehrizi, Hossein Mostaan, Reza Beygi, Mehdi Rafiei, Ahmadreza Abbasian (2018)
The effect of solution treatment time on the microstructure and ductility of naturally-aged A383 alloy die castings Ghasem Eisaabadi bozcheloei, gil yong yeom, Murat Turyakioglu, Nelson Netto, Reza Beygi, Shae Kwang Kim, Majid Zarezadeh Mehrizi (2018)
Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite Hossein Mostaan, Majid Zarezadeh Mehrizi, Mehdi Rafiei, Reza Beygi, Ahmadreza Abbasian (2017)
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature Reza Beygi, Mohsen Kazeminezhad, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Altino Loureiro (2017)
Mechanical activation-assistedcombustionsynthesisofinsitu aluminum matrixhybrid(TiC/Al2O3)nanocomposite Majid Zarezadeh Mehrizi, Reza Beygi, Hossein Mostaan, Mehdi Raoufi, Aboulfazl Barati (2016)
Hot corrosion behavior of CoWSi/WSi2 coating exposed to Na2SO4þNaCl salt at 900 1C Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Reza Beygi (2016)
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature Reza Beygi, Mohsen Kazeminezhad, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Altino Loureiro (2016)
Synthesis ofAl/TiC–Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei (2016)
Evaluation of oxidation behavior of laser clad CoWSi–WSi2 coating on pure Ni substrate at different temperatures Majid Zarezadeh Mehrizi, morteza shamanian, Ali Saidi, Reza ShojaRazavi, Reza Beygi (2015)
Conference Papers
A novel lap-butt joint design for FSW of aluminum to steel in tee- configuration: Joining mechanism, intermetallic formation, and fracture behaviour Reza Beygi, Amirabbas Talkhabi, Majid Zarezadeh Mehrizi, Eduardo A. S. Marques, Ricardo J. C. Carbas, Lucas F. M. Da Silva (2023)
The Effect of Preheating Temperature on Joint Improvement in Friction Drilling of Dissimilar Sheet Metals (AA6061/AISI304L) Mohsen Azizi, Ali Jabbari, Ehsan Soury, Shayan Dehghan, Reza Beygi, Lucas F. M. Da Silva (2023)
A novel procedure for friction stir welding aluminium to copper by using an aluminium run-on plate Reza Beygi, Ivan Galvao, Fardin Nematzadeh, Carlos Leitao, Rui Leal, Lucas da Silva (2023)
The Effect of Heat Treatment on Weld Strength of Al- Steel Joints with Different Thicknesses Reza Beygi, Saeid Ahmadi, Majid Zarezadeh Mehrizi, Mahdi Rezvanyvardom (2017)
EFFECTS OF Sr ON THE MICROSTRUCTURE OF ELECTROMAGNETICALLY STIRRED SEMI SOLID HYPOEUTECTIC Al-Si ALLOYS Ghasem Eisaabadi bozcheloei, Ali Sonboli, Reza Beygi, Majid Zarezadeh Mehrizi, Ashkan Nouri (2016)
Projects
Development of New Aluminum and Magnesium alloys Ghasem Eisaabadi bozcheloei, Majid Zarezadeh Mehrizi, Reza Beygi (2018)