Extracellular polymeric substances (EPS) were extracted from aerobic granule sludge (AGS) using 8 M aqueous urea solution. It seems that the knowledge of these multi-component systems properties and the ability to predict their phase behavior is necessary for the extraction units design as well as process optimization. In this regard, water activity using the Dynamic Vapor Sorption (DVS) method, viscosity and shear stress, pH, and conductivity were measured at 283.15–343.15 K and 0.0108 to 0.0375 wt fraction of EPS. The salting effects in ternary systems assessed and the results were interpreted in terms of solute-water and solute-solute interactions. It was found these systems were not semi-ideal and except at 283.15 K, had a positive deviation from ideal solution behavior and only at this temperature as the optimum extraction temperature, the salting-in effect was observed for each concentration of EPS. The ternary solutions behave like pseudo-plastic fluids while aqueous urea solution is a Newtonian fluid. Increasing the temperature causes a decrease and increase in pH and conductivity of ternary solutions, respectively and the presence of EPS increases those of 8 M urea solution significantly.
