2024 : 5 : 9
Ghasem Eisaabadi bozcheloei

Ghasem Eisaabadi bozcheloei

Academic rank: Associate Professor
ORCID: https://orcid.org/0000-0002-3634-4433
Education: PhD.
ScopusId: 55228660500
Faculty: Engineering
Address: Arak University
Phone:

Research activities

Journal Papers
Influence of Ag NPs shape and metal oxide shell embedded in the active layer of Si-based hybrid plasmonic solar cells on device efficiency zahra samavati, Alireza Samavati, Ahmad Fauzi Ismail, Asmahani Awang, Mohammad Velashjerdi, Ghasem Eisaabadi bozcheloei (2023)
Impact Fatigue Life of Adhesively Bonded Composite-Steel Joints Enhanced with the Bi-Adhesive Technique Alireza Akhavan Saffar, Ghasem Eisaabadi bozcheloei, Shahin Jalali, Reza Beygi, Majid Ayatollahi, Lucas da Silva (2023)
Enhancement of organic solar cell efficiency by altering the zinc oxide photoanode nanostructure morphology zahra samavati, Alireza Samavati, Ahmad Fauzi Ismail, Tohid Borhani, Mohammad Velashjerdi, Asmahani Awang, Mohd Hafiz Dzarfan Othman, Amir Rostami, Ghasem Eisaabadi bozcheloei (2022)
Effect of Cr Elimination on the Flow Behavior and Processing Map of Newly Developed ECO-7175 Aluminum Alloy During Hot Compression Majid Seyedsalehi, Bong-Hwan kim, SEONG HO HA, Shae Kwang Kim, Ghasem Eisaabadi bozcheloei (2022)
Impact fatigue life improvement of bonded structures using the bi-adhesive technique Alireza Akhavan Saffar, Ghasem Eisaabadi bozcheloei, Shahin Jalali, Reza Beygi, Lucas da Silva (2022)
Sustainable and fast saliva-based COVID-19 virus diagnosis kit using a novel GO-decorated Au/FBG sensor Alireza Samavati, zahra samavati, Mohammad Velashjerdi, Ahmad Fauzi Ismail, Mohd Hafiz Dzarfan Othman, Mohammadreza Bolurian, Marzieh Bolurian, Mohd Sohaimi Abdullah, Ghasem Eisaabadi bozcheloei (2021)
The inhibitory effect of stir zone liquefaction and eutectic-phase formation on the growth of γ/β intermetallics during dissimilar FSW of Al/Mg alloys Reza Beygi, Hesam Pouraliakbar, Kiarash Torabi, Ghasem Eisaabadi bozcheloei, Vahid Fallah, Lucas da Silva, Rao Shi, Shae Kwang Kim (2021)
Continuous monitoring of crude oil movement in an electromagnetic-assisted enhanced oil recovery process using a modified fiber Bragg grating sensor Alireza Samavati, Mohammad Velashjerdi, Ahmad Fauzi Ismail, Mohd Hafiz Dzarfan Othman, Ghasem Eisaabadi bozcheloei, Amir Rostami, zahra samavati, Asmahani Awang (2020)
Influence of ZnO nanostructure configuration on tailoring the optical bandgap: Theory and experiment Alireza Samavati, Asmahani Awang, zahra samavati, Ahmad Fauzi Ismail, Mohd Hafiz Dzarfan Othman, Amir Rostami, Ghasem Eisaabadi bozcheloei, Mohammad Velashjerdi (2020)
Microstructural evolutions of newly developed ECO-7175 aluminum alloy during hot compression: The effect of Cr elimination Bong-Hwan kim, Majid Seyedsalehi, Shae-Kwan Kim, Mohammad Sadegh Mohebbi, Ghasem Eisaabadi bozcheloei (2020)
Role of Ca in hot compression behavior and microstructural stability of AlMg5 alloy during homogenization Bong-Hwan kim, Majid Seyedsalehi, Ashkan Nouri, Mohammad Sadegh Mohebbi, SEONG HO HA, Ghasem Eisaabadi bozcheloei, Hyun Kyu Lim, Shae-Kwan Kim, Young OK Yoon (2020)
Heat Treatment Map of Al2Ca-added AlSi11MnMg Pressure-Cast Alloy Plotted by Full Factorial Design of Experiment and Analysis of Variance gil yong yeom, Ghasem Eisaabadi bozcheloei, Shae Kwang Kim, Soong keun Hyun, kyeong suk sim, Young OK Yoon (2019)
Fabrication of NiAl–Al2O3-WC nanocomposite by mechanical alloying and subsequent heat treatment Ashkan Goudarzi, Amir Lalianpour, Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei (2019)
Reaction pathway of NiAl/WC nanocomposite synthesized from mechanical activated NieAleWeC powder system Majid Zarezadeh Mehrizi, Mohammad reza Momeni, Reza Beygi, Ghasem Eisaabadi bozcheloei, Bong-Hwan kim, Shae-Kwan Kim (2019)
Mechanically activated combustion synthesis of Ti3AlC2/Al2O3nanocomposite from TiO2/Al/C powder mixtures Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei, Mohammad Velashjerdi, Fardin Nematzadeh (2019)
The effect of solution treatment time on the tensile deformation characteristics of naturally-aged A383 alloy die castings Ghasem Eisaabadi bozcheloei, Murat Turyakioglu, gil yong yeom, Nelson Netto, Reza Beygi, Shae Kwang Kim, Majid Zarezadeh Mehrizi (2018)
New numerical/experimental model for prediction of tensile properties in aluminum A357 castings: the effect of microstructure and microshrinkages Mohammad Mostafaei, Mahdi Ghobadi, Reza Beygi, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei (2018)
The effect of solution treatment time on the microstructure and ductility of naturally-aged A383 alloy die castings Ghasem Eisaabadi bozcheloei, gil yong yeom, Murat Turyakioglu, Nelson Netto, Reza Beygi, Shae Kwang Kim, Majid Zarezadeh Mehrizi (2018)
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature Reza Beygi, Mohsen Kazeminezhad, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Altino Loureiro (2017)
Evaluation of the Effects of Rotary Degassing Process Variables on the Quality of A357 Aluminum Alloy Castings Mohammad Mostafaei, Mahdi Ghobadi, Ghasem Eisaabadi bozcheloei, MUHAMMET ULUDAG, Murat Turyakioglu (2016)
TLP bonding of IN738/MBF20/IN718 system Alireza Yarmou Shamsabadi, Reza Bakhtiari, Ghasem Eisaabadi bozcheloei (2016)
Hot corrosion behavior of CoWSi/WSi2 coating exposed to Na2SO4þNaCl salt at 900 1C Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Reza Beygi (2016)
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature Reza Beygi, Mohsen Kazeminezhad, Majid Zarezadeh Mehrizi, Ghasem Eisaabadi bozcheloei, Altino Loureiro (2016)
Synthesis ofAl/TiC–Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment Majid Zarezadeh Mehrizi, Reza Beygi, Ghasem Eisaabadi bozcheloei (2016)
Effect of Various Refi nement Methods on the Morphologies of Primary Si in a Hypereutectic Al-18Si Alloy gil yong yeom, sang soo Shin, Ghasem Eisaabadi bozcheloei, Young OK Yoon, Shae Kwang Kim, Soong keun Hyun (2015)
Effects of Hydrogen Level and Cooling Rate on Ultimate Tensile Strength of Al A319 Alloy َAhamd Bahmani, Ghasem Eisaabadi bozcheloei, Parviz ِDavami, Naaser Varahram, Mohsen Ostad Shabani (2014)
Conference Papers
Shima Paridari, Hassan Saghafian Larijani, and Ghasem Eisaabadi. B Shima Paridari, Hassan Saghafian Larijani, Ghasem Eisaabadi bozcheloei (2018)
EFFECTS OF Sr ON THE MICROSTRUCTURE OF ELECTROMAGNETICALLY STIRRED SEMI SOLID HYPOEUTECTIC Al-Si ALLOYS Ghasem Eisaabadi bozcheloei, Ali Sonboli, Reza Beygi, Majid Zarezadeh Mehrizi, Ashkan Nouri (2016)
Books
Projects
Development of New Aluminum and Magnesium alloys Ghasem Eisaabadi bozcheloei, Majid Zarezadeh Mehrizi, Reza Beygi (2018)