| 1 |
A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior
|
metals
|
| 2 |
Synthesis and Characterization of the in-situ Ti3SiC2 / Al2O3 Composite by SPS of Mechanically Activated Powders of TiO2, Al, C, and Si
|
silicon
|
| 3 |
Microstructure and properties of NiAl/TiC composite synthesized by spark plasma sintering of mechanically activated elemental powders
|
ceramics international
|
| 4 |
A Parametric Study on the Effect of FSW Parameters and the Tool Geometry on the Tensile Strength of AA2024–AA7075 Joints: Microstructure and Fracture
|
lubricants
|
| 5 |
بررسی ترکیبات حاصل از سیستم پودری سه تایی Ti-Si-C به روش آلیاژسازی مکانیکی و فرآیند تف جوشی جرقه پلاسما
|
مكانيك مواد پيشرفته و هوشمند
|
| 6 |
Effect of Mg and Si on intermetallic formation and fracture behavior of pure aluminum-galvanized carbon-steel joints made by weld-brazing
|
journal of central south university
|
| 7 |
Synthesis of Ti3SnC2–Al2O3 composite by mechanical alloying and subsequent heat treatment
|
Ceramics International
|
| 8 |
Direct synthesis of NiAl intermetallic matrix composite with TiC and Al2O3 reinforcements by mechanical alloying of NiO–Al–Ti–C powder mixture
|
Ceramics International
|
| 9 |
Synthesis of NiAl/TiC–Al2O3 composite by mechanically activated combustion synthesis
|
Ceramics International
|
| 10 |
Design of friction stir welding for butt joining of aluminum to steel of dissimilar thickness: heat treatment and fracture behavior
|
The International Journal of Advanced Manufacturing Technology
|
| 11 |
Formation mechanism for synthesis of Ti3SnC2 MAX phase
|
Materials today communication
|
| 12 |
A review on recent advances in hollow spheres for hydrogen storage
|
International Journal of Hydrogen Energy
|
| 13 |
Preparation of crack-free TiO2 coating by active screen plasma annealing method
|
Materials today communication
|
| 14 |
Synthesis of NiAl-WC composite by the thermal explosion of elemental powders
|
Ceramics International
|
| 15 |
Synthesis of NiAl-TiC nanocomposite during mechanical alloying of Ni-Ti-Al-C powder mixture
|
Materials Research Express
|
| 16 |
Synthesis of a NiTi 2-AlNi-Al 2 O 3 nanocomposite by mechanical alloying and heat treatment of Al-TiO 2-NiO
|
International Journal of Minerals, Metallurgy, and Materials
|
| 17 |
Fabrication of NiAl–Al2O3-WC nanocomposite by mechanical alloying and subsequent heat treatment
|
Ceramics International
|
| 18 |
Investigation into microstructural evolutions, mechanical properties and thermal analysis of Al(Zn)/Al2O3 nano-composite fabricated by mechanical milling and SPS method
|
Materials Research Express
|
| 19 |
Synthesis of Fe3 Al–TiC-SiC Nanocomposite by Mechanical Alloying of FeSiTiO3–Al–C Powders
|
SILICON-NETH
|
| 20 |
Reaction pathway of NiAl/WC nanocomposite synthesized from mechanical activated NieAleWeC powder system
|
Ceramics International
|
| 21 |
Synthesis of a NiTi2–AlNi–Al2O3 nanocomposite by mechanical alloying and heat treatment of Al–TiO2–NiO
|
International Journal of Minerals, Metallurgy, and Materials
|
| 22 |
Mechanically activated combustion synthesis of Ti3AlC2/Al2O3nanocomposite from TiO2/Al/C powder mixtures
|
Advanced Powder Technology
|
| 23 |
Determination of Residual Stress of PACVD Nanostructure TiN Coatings by GIXRD Method
|
journal of advanced materials and processing
|
| 24 |
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature
|
The International Journal of Advanced Manufacturing Technology
|
| 25 |
Friction Stir Processing of Al with Mechanically Alloyed Al-TiO2-Graphite Powder: Microstructure and Mechanical Properties
|
Journal of Materials Engineering and Performance
|
| 26 |
Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals
|
Journal of materials processing technology
|
| 27 |
New numerical/experimental model for prediction of tensile properties in aluminum A357 castings: the effect of microstructure and microshrinkages
|
International Journal of Cast Metals Research
|
| 28 |
The effect of solution treatment time on the tensile deformation characteristics of naturally-aged A383 alloy die castings
|
Materials Science and Engineering: A
|
| 29 |
Direct reduction of blood serum cholesterol using Thymus vulgaris L.: Preliminary biosorption study
|
PROCESS BIOCHEM
|
| 30 |
CoWSi/WSi2 Nanocomposite Produced by Mechanical Alloying
|
Transactions of the Indian Institute of Metals
|
| 31 |
Reaction Pathways of Nanocomposite Synthesized in-situ from Mechanical Activated Al–C–TiO2 Powder Mixture
|
Russian Journal of Non-Ferrous Metals
|
| 32 |
Fabrication of Cerium Oxide Nanoparticles by Solution Combustion Synthesis and Their Cytotoxicity Evaluation
|
Russian Journal of Non-Ferrous Metals
|
| 33 |
The effect of solution treatment time on the microstructure and ductility of naturally-aged A383 alloy die castings
|
Materials Science and Engineering: A
|
| 34 |
Direct synthesis of Ti3AlC2-Al2O3 nanocomposite by mechanical alloying
|
Journal of Alloys and Compounds
|
| 35 |
Thermodynamic Analysis of Solid Solution Formation in the Nanocrystalline W-Co-Si Ternary System by Mechanical Alloying
|
journal of advanced materials and processing
|
| 36 |
مقایسه خواص شیمیایی، ساختاری و جذب سطحی کربن فعال تولید شده به روش فعال سازی فیزیکی از پوست سخت گردو و هسته هلو
|
نشريه علوم و مهندسي جداسازي
|
| 37 |
Hot corrosion behavior of CoWSi/WSi2 coating exposed to Na2SO4þNaCl salt at 900 1C
|
Ceramics International
|
| 38 |
Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior
|
Ceramics International
|
| 39 |
Synthesis of CoWSi–WSi2 nanocomposite by mechanical alloying and subsequent heat treatment
|
Ceramics International
|
| 40 |
Characterization and Synthesis of Co(ss)/WSi2-CoWSi Nanocomposite by Mechanical Alloying and Subsequent Sintering
|
Journal of Materials Engineering and Performance
|
| 41 |
Response to comments from M. Sharifitabar on the paper “Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite”
|
Ceramics International
|
| 42 |
Contribution of mechanical activation and annealing in the formation of nanopowders of Al(Cu)/TiC-Al2O3 hybrid nanocomposite
|
Ceramics International
|
| 43 |
Mechanical activation-assistedcombustionsynthesisofinsitu aluminum matrixhybrid(TiC/Al2O3)nanocomposite
|
Ceramics International
|
| 44 |
Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature
|
International Journal of Advanced Manufacturing Technology
|
| 45 |
Synthesis ofAl/TiC–Al2O3 nanocomposite by mechanical alloying and subsequent heat treatment
|
Ceramics International
|
| 46 |
Evaluation of oxidation behavior of laser clad CoWSi–WSi2 coating on pure Ni substrate at different temperatures
|
Ceramics International
|
| 47 |
بررسی اثر عملیات حرارتی پیرسختی بر خواص کششی آلیاژ دایکست A365 با استفاده از طراحی آزمایش و آنالیز واریانس و RSM
|
ريخته گري
|