For the first time, the effect of the chemical reduction of graphene oxide (GO) on the adsorption of ciprofloxacin (CIP) was investigated. Furthermore, GO was applied in the coagulation–floc- culation process for CIP adsorption from surface water. Moreover, the application of Fe3 O4 for enhancing sedimentation rate and reducing sludge volume was investigated. The results showed that the functional groups of GO have a significant impact on the adsorption of CIP, and chemical reduction of GO resulted in reducing the adsorption capacity. The analysis of variance showed that the quadratic model was consistent with the experimental data. Furthermore, pH and GO dosage were more effective than FeCl3 ·6H2 O in removal efficiency. Under the optimum conditions (GO dose: 0.08 mg L–1, pH: 6.0, and FeCl3 ·6H2 O:10 mg L–1) removal efficiency of 83.1% was achieved for the sample containing10 mg L–1 of CIP. The adsorption efficiency increased by increasing total dissolved solids to 800 mg L–1. The maximum removal efficiency of 95.3% was achieved at the contact time of 15 min The Langmuir isotherm model was able to predict the experimental adsorp- tion data and indicated a maximum capacity of 185 mg g–1. The sedimentation kinetic data were appropriately fitted to the pseudo-first-order model. Finally, the reusability of the absorbent was studied, and the results showed a 65% reduction in removal efficiency after three cycles. In con- clusion, the application of graphene oxide in the coagulation–flocculation process enhances the performance of the unit for adsorption of ciprofloxacin. Furthermore, the magnetite nanoparticles have a significant impact on the reduction of sludge volume and increase sedimentation rate.
